PACCAR Inc. T680 — Cooling system maintenance

COOLING SYSTEM COOLING SYSTEM CAUTION What to Check in an ELC-filled Cooling System ELC Concentration Cooling system maintenance The engine cooling system has very specific maintenance and inspection requirements. Failure to follow re quirements can damage the engine. Engine damage can include but is not limited to: Check the level of freeze/boilover protection, which is determined by the ELC concentration. Use a glycol refractometer to determine glycol level. Add ELC to obtain the ELC to water ratio required to provide the protection you need. Use the chart below to help determine how much ELC you need to add. Your engine’s cooling system is standard with Extended Life Coolant (ELC).

ELC consists of a mixture of ethylene glycol, water, and organic acid technology chemical inhibitors. ELC prevents corrosion and scale formation as well as provides freezing and boiling point protection. Freezing Boiling Corrosion This information is found in the engine manufacturers owner’s manual. It is the owner’s responsibility to follow all requirements listed in the engine man ufacturers owner’s manual. Pitted cylinder liners NOTE 5 Maximum recommended ELC con centration is 60% ELC and 40% water by volume (a 60/40 coolant mixture). The minimum recommended concen tration is 40%.

In an ELC-filled cooling system, the freeze point should be maintained between -30° F and -45° F (-34° C and -43° C). 5-72 Y53-1200-1B1 (04/13)