HEATER AND AIR CONDITIONER the side of the filter element with Sleeper HVAC Air Filter the airflow direction that is clearly marked on the air intake housing. The sleeper recirculation filter is located under the sleeper bunk on the passenger side of the vehicle. Lift the bottom bunk to access the unit. The filter can be replaced without using any tools. 6. Replace the filter cover on the air intake housing and slide the cover forward in vehicle. An audible snap sound can be heard when the cover is correctly in place. If the snap feature is damaged there are two screw features that may be utilized to retain the cover in place. 5 3.
Locate filter cover labeled with an arrow pointing rearward in vehicle. Slide filter cover rearward in vehicle until you are able to remove the cover. 4. Remove and inspect filter referring to maintenance interval schedule. 1. Lift the sleeper bunk to expose the sleeper HVAC module. 5. Replace filter in housing taking care to align the airflow direction that is indicated on the side of 7. Close and secure hood of vehicle. 2. Find the retention tab at the side of the filter element and move it to release the filter. Moving this tab 5-114 Y53-1200-1B1 (04/13)