PACCAR Inc. T680 — How to Navigate the Functions in the Driver Performance Center

INSTRUMENT PANEL Ignition Timer Fuel Economy Trip Information This function displays the dynamic fuel economy performance of the vehicle. It shows Average Speed, Average Fuel Economy, and a dynamic instantaneous indication of fuel economy above or below the current average. The screen is available when driving. Average fuel economy is computed by the fuel consumed during the trip (see the next section for Trip information). The fuel economy for a trip will be reset when that trip odometer is reset. 3 This function allows the driver to set a timer to shut off the truck. This feature is only available when the vehicle is parked.

After the timer is set, the ignition key may be turned to the off position and removed. The engine will continue to run for the programmed time, then will shut off automatically. This function allows you to keep trip information data on up to 4 separate trips labeled A, B, C, and D. Trips are also selectable as “Active” or “Inactive” so you can use the data logging function to treat trips separate from each other, or as segments of a combined trip. When driving, the screen only allows you to toggle which trip is viewed in the trip odometer and set the active/inactive status. When parked you can select and view a variety of data collected for each trip, as seen in the list below:

3-24 Y53-1200-1B1 (04/13)