INSTRUMENT PANEL To turn alarm ON/OFF: To set home, local or alarm time: Display Mode The display off mode is available at any time in menu navigation, but the screen minimize mode can only be done when on this screen. NOTE 3 There are times when the “Display Off” mode is not allowed or over-ridden by the system, for example if a “pop-up” message appears, the screen will turn back on, or if the truck is equipped with an adaptive cruise control system, the screen cannot be turned off when it is active. 1. When in the Settings Menu, scroll 1. When in the Settings Menu, scroll through the list of menu items to through the list of menu items. “Alarm”. Press the MCS. 2.
Press the MCS to select the item 2. Press the MCS to turn the alarm to change. ON or OFF. 3. Rotate the MCS knob to change To set clock display format: the hour. Press the MCS. 1. When in the Settings Menu, scroll 4. Rotate the MCS knob to change through the list of menu items to the minutes. Press the MCS. “Format”. 5. Rotate the MCS to toggle AM/PM. 2. Press the MCS to display either 12 Press the MCS. hour (AM/PM) or 24 hour (military) time. 6. Press the button above the MCS to Exit. 3-28 Y53-1200-1B1 (04/13)