OM2026.1 6. 1 Safety - Section 2 Safety Page 2-11 PRECAUTIONS FOR MAINTENANCE RE CARRYING OUT MAINTENANCE NG TAG hers start the engine or operate the controls while you are performing service or lubrication, you could er serious injury or death. AYS attach the WARNING TAG to the control lever in the operator's cab to alert others that you are king on the machine. Attach additional warning tags around the machine, if necessary. se tags are available from your Komatsu distributor. (Part No. 09963-03000) PRECAUTIONS FOR MAINTENANCE E CARRYING OUT MAINTENANCE G TAG ers start the engine or operate the controls while you are performing service or lubrication, you could serious injury or death.
AYS attach the WARNING TAG to the control lever in the operator's cab to alert others that you are ng on the machine. Attach additional warning tags around the machine, if necessary. e tags are available from your Komatsu distributor. (Part No. 09963-03000) the machine. Attach additional warning tags around the machine, if necessary. are available from your Komatsu distributor. (Part No. 09963-03000) he machine. Attach additional warning tags around the machine, if necessary. are available from your Komatsu distributor. (Part No. 09963-03000) L o o P y e T yi s e ra . ov ic u yi o S ols suited to the task. Using damaged, low quality, faulty, or ols could cause personal injury.
LACEMENT OF CRITICAL PARTS replace parts used to insure safety or prevent accident. se components periodically with new ones, regardless of whether or not they appear to be hese components deteriorate over time. repair any such components if any defect is found, even though they have not reached the time E ENGINE BEFORE SERVICE ng out inspection or maintenance, always stop the machine on firm flat ground, lower the dump top the engine. must be run during service, such as when cleaning the radiator, always set the shift selector lever l (N) position and the parking brake lever to the PARKING position.
Always carry out the work with One person should sit in the operator's seat so that the engine can be stopped, if necessary. e any controls not needed for operation. ing the machine, be careful not to touch any moving part or get clothing caught. nder the wheels. ng out service with the dump body raised, always place the dump lever at the HOLD position, and dy-up safety pins (or safety cable, if equipped) securely.