MACHINE OPERATIONS AND CONTROLS OPERATION 4. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position. 5. Continue idling for 15 seconds after the engine starts. During this time, do not operate the control levers or fuel control dial. STARTING ENGINE IN COLD WEATHER G Check that there are no persons or obstacles in the surrounding area, then sound the horn and start the engine. G Never use starting aid fluids as they may cause explo- sions.
NOTICE G If the fuel control dial is at the FULL position, the engine will pick up suddenly and this will damage the engine parts, so always set the fuel control dial to the mid-range or low position. G Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine will not start, wait for at least two minutes before trying to start the engine again. When starting in low temperatures, do as follows. 1. Before starting the engine, check that fuel control dial (1) is at the low idling position. 2. Turn fuel control dial (1) to the center position between LOW IDLING and HIGH IDLING. 3-56 WARNING