MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATION PREPARATIONS FOR MOVING THE MACHINE OFF G Before operating the steering levers, check the direc- tion of the track frame. If the sprocket is at the front, the operation of the travel levers is reversed. G When moving off, check that the area around the machine is safe, and sound the horn before moving. G Do not allow anyone in the area around the machine. G Remove all obstacles from the travel path of the machine. G The rear of the machine is a blind spot, so be particu- larly careful when travel in reverse. G For machines equipped with a travel alarm (if equipped), check that the warning equipment works properly. 1.
Set swing lock switch (1) to the ON (actuated) position and confirm that swing lock monitor lamp (2) lights up. 2. Turn fuel control dial (3) towards the full speed position to increase the engine speed. 3-62 WARNING