EXPLANATION OF COMPONENTS OPERATION TONE CONTROL KNOB Turn the knob to adjust the tone as follows. Turn CLOCKWISE to emphasize the high sounds Turn COUNTERCLOCKWISE to suppress the high sounds FM/AM SELECTOR BUTTON (AM/FM) Press this button and select the desired band. Each time the button is pressed, it switches AM FM AM ... DISPLAY SELECTOR BUTTON (TIME) This equipment gives priority to the frequency display. If the button is pressed when the frequency is displayed, display will give the present time for 5 seconds. After 5 seconds pass, the display will automatically return to the frequency display.
If any button other than TIME SET (H, M, SET) is pressed within the 5 seconds, the display will return to the frequency display. MANUAL TUNING (MANUAL) Use the buttons to change the frequency. Up button ( ): Each time the button is pressed, the frequency will go up in steps (FM: 0.1 MHz, AM: 9 kHz). Down button ( ): Each time the button is pressed, the fre- quency will go down in steps (FM: 0.1 MHz, AM: 9 kHz). 3-36