POWER PRODUCTION - ENGINE COOLANT SYSTEM ENGINE COOLANT SYSTEM - General specification (B.50.A - D.40.A.10) AFX8010 Thermostat - Torque (B.50.A.18 - D.20.A.10) AFX8010 Water pump - Torque (B.50.A.20 - D.20.A.10) AFX8010 Fan and drive - Torque (B.50.A.54 - D.20.A.10) AFX8010 9675 1 27/05/2004 B.50.A / 4 Cooling system Water circulation Fan, attached to the water pump pulley Intake, 7-blade in sheet metal Water pump Poly -V belt driven centrifugal vane type Engine speed/water pump speed ratio 1:1.62 1.83 Start of opening 85 °C185 °F 80 °C176 °F Max 95 °C203 °F 95 °C203 °F System Pressure Max Relief: 69 kPa ( 10 psi ) Coolant Capacity: 42 L ( 11.1 US gal ) Coolant Specification:
Use Case IH XHD antifreeze or a premium blend that meets TMC RP329 and TMC RP330 Specifications. Screw securing thermostat box to cylinder head M8x1.25 16 - 22 Nm 12 - 16 lb ft Screw securing water pump to crankcase M8x1.25 23 - 27 Nm 17 - 19 lb ft Screw securing spacer/pulley to fan M10x1.25 54 - 61 Nm 40 - 45 lb ft Screw securing automatic tightener to crankcase M10x1.25 45 - 55 Nm 34 - 40 lb ft Screw securing fixed tightener to crankcase M12x1.75 100 - 110 Nm 74 - 80 lb ft Screw fan mount to crankcase M812x1.75 95 - 105 Nm 70 - 76 lb ft Screws securing pulley to crankshaft (Before assembly, lubricate with engine oil) M14x2 Pre-torque 70 Nm 51 lb ft