POWER PRODUCTION - ENGINE COOLANT SYSTEM 10. Tighten all the bolts with isolation mounts to a maximum torque 36 Nm ( 26.5 lb ft ) IMPORTANT: Do not over tighten the elastic fasteners. 11. Install chaff wiper assembly. Radiator Wiper - Install (B.50.A.32.65 - F.10.A.15) 12. Be sure all plastic access plugs are re-installed into the cooler housing. 10034911 9 Next operation: Fan and drive - Install (B.50.A.54 - F.10.A.15) Next operation: Engine hood - Install (E.20.A.72 - F.10.A.15) 9675 1 27/05/2004 B.50.A / 26