Case IH AFX8010 — LUBRICATION SYSTEM

POWER PRODUCTION - LUBRICATION SYSTEM Sensing system Oil pressure - Overview (B.60.A.95.91 - C.10.A.10) AFX8010 40033793B4 1 The Engine Oil Pressure Sensor B-52 (1) monitors the engine oil pressure and sends the information to the CCM2 module connector X016 pin J2-33. The CCM2 module monitors the engine oil pressure in an effort to prevent major engine damage, and to warn the operator of insufficient oil pressure. If the engine has been running for at least 10 seconds, and the oil pressure drops to 1 bar ( 14 psi ) for 3 seconds, the alarm message "A0002 Engine Oil Pressure LOW" will be displayed to the operator, and the engine will shut down automatically within 7 seconds to prevent damage.

The engine oil pressure sensor circuit is also monitored by the CCM2 module; in the event that a fault occurs with the sensor itself or the wiring to the sensor, a fault code will be displayed to the operator. E0161-01 - Oil Pressure Sensor E0161-03 - Oil Pressure Sensor E0161-05 - Oil Pressure Sensor For additional information on the engine oil pressure sensor electrical circuit, refer to: Wiring harness - Electrical schematic frame 04 (A.30.A.88 - C.20.E.04) 9676 1 27/05/2004 B.60.A / 11