POWER TRAIN - POWER COUPLING Fixed coupling 4. To remove the bearing cups (1) from the housing and the flange use a small pry bar to work them out carefully. NOTE: When removing the bearing cups from the covers, use care as to how many shims came from that location. Also if re-using bearings keep track of sets. Bearings are matched fitted sets. 20034949A5 4 5. To remove the bearings (1) from the gear shafts (2) use pullers with the correct adapters. 10034954A5 5 6. On the "inboard" side of the PTO gearbox remove the lube oil plumbing lines (1) , and fittings. 7. Remove the breather and fitting (1) . 20035872A5 6 20035884A5 7 9679 1 27/05/2004 C.10.B / 7