Case IH AFX8010 — POWER COUPLING Fixed coupling

POWER TRAIN - POWER COUPLING Fixed coupling PTO drive - Assemble (C.10.B.42 - F.10.A.20) AFX8010 1. Chill bearing cups (1) in an ice bath. Press the chilled cups (1) into the appropriate bores using the appropriate drivers. Check to see each cup is fully seated. 20034949B5 1 2. Press bearing cones (1) onto PFC System Pump shaft (2) using a driver. Repeat on the Triple Gear Pump shaft, Rotor and Feeder Hydro Pumps shaft, Ground Drive Pump shaft, and Feeder CVT shaft. Check to see each is fully seated. 10034950A5 2 3. Place the now assembled shafts into housing subassembly. Be sure the shaft location is correct using the correct tooth gear and shaft.

Refer to PTO drive - Overview (C.10.B.42 - C.10.A.10) . Be sure the shafts are fully seated into the cups in the housing. 20034955 3 9679 1 27/05/2004 C.10.B / 10