Case IH AFX8010 — TRANSMISSION Mechanical

POWER TRAIN - TRANSMISSION Mechanical 8. To disassemble the input shaft proceed as follows. Unlock lock washer (2) . Remove nut (1) using tool 380001074 lock washer (2) and washer (3) . 3406a 8 9. Remove gear (2) bearing (1) and the washer between the two parts with a puller. 3407a 9 10. Remove needle bearings (1) . Remove selector ring (2) at the same time remove two balls (3) and the springs behind it. The balls (3) are spring loaded, do not lose them. 3408a 10 11. Remove retaining ring (1) . Remove washer (2) and selector housing (3) at the same time. Remove gear (4) . 3409a 11 9680 1 27/05/2004 C.20.B / 51