POWER TRAIN - PROCESS DRIVE Primary process drive 4. To install the shaft (3) end seals, use the seal expander tool (2) to first expand the seal 3 (1) . NOTE: Be sure to use the proper tools to install the ring seals. If the seals are not installed properly, they may leak or fail. 10041894A5 4 5. Use the seal pusher tool (1) to evenly slide the seal (2) into the groove (4) on the shaft (5) . NOTE: Be sure to use the proper tools to install the ring seals. If the seals are not installed properly, they may leak or fail. 10041893A5 5 6. Use the seal compressor tool (1) to be sure the seal is fully compressed into the groove on the shaft (2) . NOTE:
Be sure to use the proper tools to install the ring seals. If the seals are not installed properly, they may leak or fail. 7. Before installing the cover (2) be sure to check the O ring (1) and lube with hydraulic oil or petroleum jelly. 10041898A5 6 20035857A5 7 9683 1 27/05/2004 C.50.B / 15