DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM 9 8 3 7 2 1 4 5 6 50031060 2 The AFX combine is equipped with a minimum of 7 electronic modules, and may be equipped with as many as 9 modules, depending on the configuration and options installed. These modules are: Chassis Control Modules CCM1, 4, CCM2, 5 and CCM3, 6; these modules drive most of the actuators and solenoids, and monitor most of the sensors and switches on the combine. Universal Display Plus Module, 1; provides the main display of information for the operator. YMIU Module, 7, [optional] is installed and used to control certain options on the combine, such as the precision farming devices.
Shaft Speed Monitor (SSM), 2, provides the display for shaft speed alarms, and for fuel level and coolant temp gauges. Differential GPS module, 8, [optional] is available with some precision farming systems, and provides location data to be recorded with the harvest data for mapping purposes. Right Hand Module (RHM), 3; most operator inputs, including from the propulsion handle (MFH), are fed into this module, which then reports this information to the other modules in the network for action. Engine Control Unit (ECU), 9, is installed to provide enhanced engine control and performance. A.30 / 5C