TRAVELLING - SERVICE BRAKE Hydraulic 6. Check the conditions of seals (6) . If necessary, replace them. NOTE: In case the seals are replaced, bleed the brakes described in SERVICE BRAKE Hydraulic - Bleed (D.30.C - F.35.A.25) after replacing the pads. ZDA5219A 4 7. Push the brake pistons in their housing to allow the installation of new brake pads. Install new brake pads. 8. Secure brake pads with pins (4) . ZDA5218A 5 9. Connect electric wires at (3) . Install cover and bolts. Torque bolts 4 - 6 Nm ( 3 - 4.5 lb ft ). ZDA5217A 6 9690 1 27/05/2004 D.30.C / 7