DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM RESISTANCE DEVICES A number of electrical components alter or make use of electricity through their resistance to current flow. Resistors are components which are generally used to regulate the supply of voltage and current to other electrical components. In some cases, the purpose of resistance in an electrical circuit is to provide light or heat. Lamps and cigar lighters are examples. Lamps convert electricity into light, and cigar lighters convert it into heat. Both lamps and lighters make use of the same physical principle, that is Ohms Law.
27 The engine grid heater and heated cab mirrors are other examples of resistance devices designed to convert electricity into heat. FLUID LEVEL SENDER It operates by varying resistance through the movement of a float. An example is the fuel level sender. 28 POTENTIOMETERS Potentiometers are variable resistors which are dependant on mechanical movement, i.e. Lateral float movement, to vary the resistance of the component and therefore alter the output voltage. In order to verify the correct operation of a potentiometer, the resistance should be measured at the minimum and maximum positions and a smooth and continuous change of resistance should be observed between.
As the resistance varies with temperature, the test specifications are usually given at 20 ° C. 29 A.30 / 5Q