Case IH AFX8010 — PARKING BRAKE Hydraulic

TRAVELLING - PARKING BRAKE Hydraulic 4. Screw on nut (9) and tighten it until the piston is against the housing (1) . NOTE: Be careful not to damage the piston seal and O - ring. ZDA4946A 4 5. Apply a cable tie (1) around the piston seal and the O - ring and position the piston in the inner housing (1) . ZDA5078A 5 6. Insert four bolts (19) with washers and tighten them alternately until the seals are in housing (1) . Remove the cable tie. ZDA5079A 6 7. Install shims (15) and tighten four bolts (19) . ZDA4938A 7 9691 1 27/05/2004 D.32.C / 18