Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM ELECTROMAGNETIC DEVICES In general, they use the magnetic field created by flowing current to move metal parts within the components. RELAYS The relay is an electromagnetic switch that uses a small amount of current to switch a larger amount on and off. When the operator closes a switch, current flows through the relay’s control circuit. In this circuit there are windings surrounding an iron core which is fixed in place. 31 Current turns the iron core into an electromagnet. The core then attracts an arm which has a contact point on it. When the point on the arm contacts the stationary point, current flows through the power circuit.

Relays are basically electrically operated switches. They are used to switch a circuit on/off in similar way to a manual switch. Two circuits are connected to the relay: A work circuit, which is switched on/off by the relay, and provides the supply for the equipment to be operated, i.e., bulbs, solenoids, etc.; A control circuit, switched on/off by manual switches, used to operate the relay. The part of the relay which is connected to the control circuit consists of the winding of an electro-magnet. When the control circuit is switched off, the contacts are kept apart by a return spring.

When the control circuit is switched on, a current flows through the coil and a magnetic force is produced. This force, which is stronger than the spring pressure, pulls the contacts of the relay together, causing the work circuit to operate. A.30 / 5S