BODY AND STRUCTURE - SHIELD Side shield - Remove (E.20.A.70 - F.10.A.10) AFX8010 1. To remove left hand lower shielding and service platform, proceed as follows: Remove cap screws and nuts (1) . Lift hinge pivot plate (2) to release screened service shields (3) and (4) and set aside. 40033215A5 1 2. Remove toolbox tray (1) . Lift key (2) to disengage tab (3) on toolbox support bracket. Pull bottom of box away from tab and then lift box off of bracket. 40033216A5 2 3. Remove two cap screws (1) with curved washers and lock nuts from the rear platform support pipe. Remove two cap screws with regular nuts and lock washers (2) that fasten the solid shield to the same pipe. 40033217A5 3 4.
Remove two cap screws with lock washers and nuts (1) from front end of platform support pipe at main frame attachment to front axle. 40033218A5 4 9696 1 27/05/2004 E.20.A / 3