BODY AND STRUCTURE - USER CONTROLS AND SEAT 8. Rotate the cable around, then down, releasing the keeper from the lever (1) . Pull the electrical connectors (2) from the micro switch. 40015768 8 9. Remove screw (1) . Using a screwdriver, push in tabs at (2) . 40015766 9 10. Using a finger or a screwdriver, push in cable clip (1) . 40015769 10 11. Turn out screw (1) . Push the pin and rubber grommets (2) from the belt (3) . 40015770 11 12. Remove lock nuts (4) . Pull the adjuster part way from the pedestal. 9698 1 27/05/2004 E.32.A / 11