Case IH AFX8010 — ENVIRONMENT CONTROL Heating, ventilation and air-conditioning

BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning Compressor - Remove (E.40.D.31 - F.10.A.10) AFX8010 1. Recover refrigerant in accordance with local regulations. NOTE: A 1/2" drive cutout square is provided in the arm of the idler pulley. By using a long handled 1/2" drive breaker bar you can release the tension on the belt.. 2. Use a 1/2" drive long handle breaker bar to release the tension on the belt. Remove the belt from the compressor pulley when the tension is relieved. 50034738 1 3. Detach the compressor clutch electrical connector (1) . 50034748C5 2 4. Disconnect the suction and discharge lines. 5.

Cap the lines to prevent moisture or foreign material from entering the system. 6. Remove the compressor mounting bolts (2) and lift the compressor (1) from the combine. 50034748B5 3 9702 1 27/05/2004 E.40.D / 19