BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning Compressor Magnetic clutch - Remove (E.40.D.31.80 - F.10.A.10) AFX8010 1. Insert the two pins of the front plate wrench into any two threaded holes of the clutch front plate. Hold the clutch plate stationary.Remove the hex nut with a 19 mm socket. NOTE: It is highly recommended to remove the compressor from the machine to repair the compressor. 20018359 1 2. Remove the clutch plate using a puller. Align the puller center bolt to the compressor shaft. Thumb tighten the three puler bolts into the threaded holes. Turn the center bolt clockwise until the front plate is loosened. 20018360 2 3.
Remove the shaft key by lightly tapping it loose with a slot screwdriver and hammer. 20018361 3 9702 1 27/05/2004 E.40.D / 21