Case IH AFX8010 — ENVIRONMENT CONTROL Heating, ventilation and air-conditioning

BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning Evaporator - Install (E.40.D.33 - F.10.A.15) AFX8010 1. Install a new seal, and slide the evaporator core into the ventilation housing with the ports of the thermal expansion valve facing down. 10008342A 1 2. Turn in four cap screws (1) holding the core to the housing. Lubricate the O-rings with refrigerant oil and connect the supply and return lines if they had been previously removed. Tighten the lines to the correct torque. 10036360A5 2 3. Carefully insert the thermal sensing probe (1) into the evaporator core. Attach the electrical connector if it had been unplugged.

10036371A5 3 9702 1 27/05/2004 E.40.D / 32