BODY AND STRUCTURE - ENVIRONMENT CONTROL Heating, ventilation and air-conditioning 9. Carefully pull the evaporator core from the housing with the refrigerant lines still attached. 10008342A 9 10. Take out the mounting cap screw for the heater core from the inside of the ventilation housing. 11. If the heater core is to be completely removed from the combine, remove hoses from the heater core. Turn out mounting cap screws. Pull the core from the housing. NOTE: When removing heater hoses, residual coolant will drain. 10010480 10 9702 1 27/05/2004 E.40.D / 39