CROP PROCESSING - FEEDING Reel feeding B. If 12 volts is not present, there is an open circuit in the front frame (FF) harness between connector X021 pin E and connector X017 pin J3-2 wire 556 white. Locate the open and repair. 7. Visually inspect the harness and connectors for damage, bent or dislocated pins, corroded terminals or broken wires. A. If no damage is found, erase the fault code and continue operation. Wiring harness - Electrical schematic frame 12 (A.30.A.88 - C.20.E.12) AFXSCHEM12-04 1 9710 1 27/05/2004 K.25.B / 20