CROP PROCESSING - FEEDING Feeder housing Drive system - Install (K.25.E.40 - F.10.A.15) AFX8010 With stone trap 1. Raise the feeder completely and engage the cylinder safety stop. 40030317 1 2. Install the drive shaft (1) into the feeder with the threaded end toward the right hand side. 3. Insert 1-1/2" washer and 1-1/2" bolt (1) into the end of the drive shaft. 50040148A5 2 50040158A5 3 4. Line up the drive shaft (1) and the beater drum (2) . Coat the splines with #2 moly disulfide grease, then install the gearbox. 10032093A5 4 9712 1 27/05/2004 K.25.E / 18