CROP PROCESSING - FEEDING Feeder housing Drive system - Remove (K.25.E.40 - F.10.A.10) AFX8010 Without stone trap 1. Raise the feeder completely and engage the cylinder safety stop. 40030317 1 2. Remove the feed chain as described in Feed chain - Remove (K.25.E.48 - F.10.A.10) . 3. Hook the strap (1) to hold the flap seal away from the feeder. Remove the bolts (2) and remove the front rotor cover (3) . 10032087A5 2 4. Remove the floor section (1) by removing the bolts, washers and nuts (2) . Push the floor up, then back, then bring the front end down and out. 10032083A5 3 5. Support the end of the drive shaft.
Disconnect the drive lines (1) and the speed sensor (2) and remove gearbox (3) from the feeder. 50032030A5 4 9712 1 27/05/2004 K.25.E / 20