Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing 5. Connect the drive lines (1) and the speed sensor (2) to the gearbox (3) . 50032030A5 5 6. Torque the 1-1/2" bolt (1) to 1054 Nm ( 775 lb ft ). 50040157A5 6 7. Install the cap (1) . 10032085A5 7 8. Install the floor section (1) by lifting the back end into the feeder first. Once the entire floor is in the feeder, slide it forward, and bring the back down, then slide it into position. Secure in place with the bolts, washers and nuts (2) . 10032083A5 8 9712 1 27/05/2004 K.25.E / 23