Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM Connector X012 - Cab Main Harness to CCM3 10004693A5 34 Inside cab, underneath instructional seat (remove storage bin) 1. CCM1 2. CCM2 3. CCM3 4. Connector X018 5. Connector X015 6.

Connector X012 9667 1 27/05/2004 A.30.A / 29 Cavity Circuit ID Description 12 876 (WH) CCM1 J2-30 to feeder engine to ring clutch L-47 13 877 (BL) CCM2 J2-40 to beater / chopper clutch L-22 14 878 (WH) CCM2 J2-30 to beater / chopper clutch L-22 15 879 (GY) CCM2 J3-21 to ground speed hydrostat L-23 16 880 (WH) CCM2 J3-31 to ground speed hydrostat L-23 17 1081 (BK/WH) Clean ground for rotor RPM B-01 and rotor hydrostat RPM B-58 18 568 (WH) CCM2 J2-4 to unload tube clutch L-08 19 601 (BL) CCM2 J2-20 to unload tube clutch L-08 20 open 21 486 (PK) CCM2 J2-31 to low control pressure B-35 22 683 (BL) CCM2 J2-14 to low control pressure B-35 23 1050 (WH) CCM1 J3-31 to feeder pump swash plus L-49 24 1255 (OR) Fuse F-45 to rotor RPM B-01 and rotor hydrostat RPM B-58 25 1069 (YE) Rotor hydrostat RPM B-58 to CCM3 J3-14 26 1062 (BL) CCM3 J2-40 to rotor engine to ring clutch L-45 27 1049 (WH) CCM3 J3-3 to rotor ring to frame clutch L-46 28 1065 (BL) CCM3 J2-10 to rotor pump swash plus L-40 & rotor pump swash minus L-41 29 1261 (YE) Rotor RPM B-01 to CCM2 J2-37 and CCM3 J3-13 30 422 (YE) Not used 31 423 (YE) Low control pressure B-35 to CCM2 J2-19