CROP PROCESSING - FEEDING Feeder housing 21. Press the input shaft into the bearing while supporting the rear of the bearing in the press. 10034623 20 22. Install the bearing under the pinion gear in a press with the proper plug. Install shims (1) and retaining ring. 10034621A5 21 23. Check the gear backlash using a dial indicator: 0.15/0.30 mm. 24. Use gasket compound on the access cover. Torque bolts to 217 lb in . 50034949 22 10034613 23 9712 1 27/05/2004 K.25.E / 40