CROP PROCESSING - FEEDING Feeder housing - wire 1243 yellow, feeder engage switch connector X056 pin 6 to feeder engage diodes connector X400 pin A - wire 225 yellow, feeder engage diodes connector X400 pin B through connector X001 pin 15 to connector X018 pin J1-17 - wire 112 yellow, feeder engage switch connector X056 pin 6 through connector X001 pin 19 to connector X018 pin J1-7 Locate the short and repair. B. If the voltage reading is 10 - 18 volts , and the diagnostic screen is still indicating voltage in excess of 18 volts , there is an internal fault in CCM1. Reload the software for CCM1. If that does not correct the concern, replace the module. 5.
Operate the machine while observing the Universal Display Plus "DIAG" screen. A. If no high out of range readings are detected, erase the fault code and continue operation. 9712 1 27/05/2004 K.25.E / 50