CROP PROCESSING - THRESHING Axial flow threshing 7. Remove the driveshaft (2) from the CVT gearbox (1) . 50034645A5 4 8. To remove the driveshaft (2) you will need to hold it from moving when breaking free the bolts by placing a small bar (1) between the cross. 9. The steps on the rear of the grain tank may have to be removed. 50034647A5 5 10. Using an overhead hoist and a chain or safety strap capable of lifting the gearbox hook into the cast loop on the housing. 11. Exert tension on the gearbox so when the bolts securing it are removed it does not drop. 12. Remove the six bolts attaching the gearbox to the machine. 13. Pry the gearbox out of the rotor coupler and turn it sideways.
9714 1 27/05/2004 K.40.C / 15