CROP PROCESSING - THRESHING Axial flow threshing 8. Disassemble and take away the gears (1)(4)(6) , spacers (2) , (5) and, inner ring (3) from housing. 10041871A5 8 9. Unlock bolts (4) take away washers (3) , wrapper (2) and spacer (1) . Disassemble outer ring (5) using a chisel and hammer. 10041872A5 9 10. Remove the punched area on the stakenut (1) , take away washer (2) , and crown wheel (3) . Disassemble inner ring (4) from the crown wheel (3) using a bearing separator. Disassemble snap ring (5) and shim (6) from the shaft. Disassemble cap (9) using a chisel and hammer. Remove punched area on stakenut (8) , unlock the stakenut and take away washer (7) . 11.
Extract gear (1) from the shaft (6) . Extract needle bearings (2) from the gear (1) and snap ring (3) . Take away spacer (4) and shift collar (5) from the shaft. 10041873A5 10 10041874A5 11 9714 1 27/05/2004 K.40.C / 19