Case IH AFX8010 — THRESHING Axial flow threshing

CROP PROCESSING - THRESHING Axial flow threshing 17. Install the feeder plate (1) . Install pivot pin (2) into the feeder plate. Install the bolt and washer (3) through the feeder plate pivot pin (2) . Repeat for opposite side. 10030045B4 12 18. Remove the block of wood by lowering the concaves, and also remove the rotor retaining tool from the rotor if it has not been done already in a previous step. Install the rotor access cover, and the grain tank access door. Next operation: FEEDING Feeder housing - Install (K.25.E - F.10.A.15) 9714 1 27/05/2004 K.40.C / 39