Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 13. Attach upper end of angle bracket (1) to elevator housing and side panel latch bracket with two (2) M6X20 cap screws, lock washers and nuts (2) . 40037323A5 11 14. Install right hand drives area screen with two (2) M8X20 cap screws, lock washers, and nuts (1) . 15. Fasten right hand drives area screen with two (2) M8X20 cap screws and lock washers (1) into weld nuts in the frame. 40033204A5 12 40033205A5 13 16. Slide tubular spacer over auger shaft to locate sprocket. Install bearing flanges and bearing (1) and retain with carriage bolts, lock washers and nuts (2) .

Tighten lock collar (3) in clockwise direction and lock set screw with 5mm hex Allen wrench. NOTE: Lubricate the spherical outer race with CASE AKCELA PREMIUM GREASE EP-2 and lubricate the locking collar track of the inner race of the bearing and the lock collar with Loctite product 767 antiseize grease to ease future disassembly. 50037327B5 14 9716 1 27/05/2004 K.60.B / 43