CROP PROCESSING - CLEANING Primary cleaning 12. Attach the motor isolator and bracket with two bolts to the frame (1) , and two bolts to the motor (2) . 10042957A5 11 13. When the motor is in place and aligned, install and tighten the set screw (1) into the shaft. Torque the two set screws to 46 - 52 Nm ( 34 - 38 lb ft ) 10042958A5 12 14. Install the shield on the left hand side of the machine using two nuts (1) . 15. Install the platform (1) on the right hand side of the machine. 40034844A5 13 10042951A5 14 9717 1 27/05/2004 K.62.B / 44