CROP PROCESSING - UNLOADING Grain unloading Clutch - Remove (K.72.B.16 - F.10.A.10) AFX8010 1. Loosen the belt tension (1) on the drive belt (2) . Remove the belt (2) from the pulley (5) . To remove the pulley (5) from the shaft remove the bolt (3) and washer (4) , and use a puller to remove the pulley (5) . Remove the key from the shaft. 10036392A5 1 2. On the inboard side of the gearbox, remove the four bolts (1) from the muffler bracket bolted to the engine. 10036390A5 2 3. Disconnect the electrical solenoid connector (1) from the unload valve. NOTE: Disconnect any other connectors temporarily to gain access if so needed. 10036391A5 3 9723 1 27/05/2004 K.72.B / 4