Case IH AFX8010 — UNLOADING Grain unloading

CROP PROCESSING - UNLOADING Grain unloading Clutch - Install (K.72.B.16 - F.10.A.15) AFX8010 1. Install the shaft/clutch assembly (1) into the gearbox. Be sure to mesh the teeth on the gears correctly. 2. Be sure the tab (1) from the shaft brake fits into the groove in the gearbox housing. 20035849B5 1 10035846B5 2 3. Replace the lip seals on the outboard side of the gearbox for unload shaft if necessary. Before the plate can be installed, replace the two ring seals (1) on the end of the shaft (2) using the expander, seal pusher, and compression tools. Once the seals are installed and compressed, install the plate onto the shaft. 20035858A5 3 9723 1 27/05/2004 K.72.B / 15