Case IH AFX8010 — ELECTRICAL POWER SYSTEM

DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM All wires in the schematic are labeled to indicate the specific harness they are in, the circuit number, the wire color (see chart below), and the wire size, indicated in square mm cross-section. On the combine, the appropriate circuit number is printed on each wire approximately every 50 mm (2 ) to identify it. 20010929 8 In addition, the wire colors used identify the function of the wire, depending on the type of component that the wire is connected to. The following wire colors are used for the CR combine wiring harnesses:

The following tables identify the specific wiring colors and functions, as well as the standard connector location for each wire type for each component group. A.30 /190E Wire Size Chart Square mm AWG 0.5 20 0.8 18 1.0 16 2.0 14 3.0 12 5.0 10 8.0 8 Color Color Code Function Black BK Ground, Chassis Blue BL Printed Circuit Ground White WH Increasing Actuation Gray GY Decreasing Actuation Orange OR Power After Ignition Yellow Y Signal Wires Red RD Battery Voltage Purple P Lighting Pink K Reference Voltage Black w/ White tracer BK/WH Clean Ground