Case IH AFX8010 — ELECTRONIC SYSTEM

DISTRIBUTION SYSTEMS - ELECTRONIC SYSTEM 8. Clean the fin (1) using a cloth. IMPORTANT: Do not use a screw driver or any other sharp object to avoid scratches on the sensor fin while cleaning. 10037334A5 7 9. Clean inside the bin housing in the area of the white circle, which is the face of the level sensor. 10. Turn the ignition switch to the position. Remove the two nuts (1) to remove cover (2) . 10037335A5 8 11. The cylindrical level sensor (1) is now visible. At the back of the sensor, there is a small screw (2) . To set the sensor, use the Universal Display Plus screen. Select the sort menu, and select “BYPASS FULL to check the voltage range.

Turn the small adjustment screw (2) clockwise (CW) until the voltage just switches to something less than 2.5 volts . Turn the adjustment screw four full revolutions CCW from this point. Now the sensitivity of the level sensor should be set correctly. 10037336A5 9 9669 1 27/05/2004 A.50.A / 9