DISTRIBUTION SYSTEMS - ELECTRONIC SYSTEM harness attaches to each module from inside the cab, while the main frame (MF), front frame (FF), and expansion (EX) harnesses attach to the modules from outside the cab, through the holes in the cab floor. In general, the modules take care of the following functional areas of the combine: CCM1 module manages feeder engagement, header height control, cleaning system self-leveling, and concave adjustment. The main frame (MF) harness attaches to CCM1 connector X019 , while the front frame (FF) harness attaches to CCM1 connector X020 .
CCM2 module manages threshing system engagement, ground drive systems including transmission shifting, reel and unload tube hydraulics, and engine sensors monitoring. The main frame (MF) harness attaches to CCM2 connector X016 , while the front frame (FF) harness attaches to CCM2 connector X017 . CCM3 module manages rotor drive engagement, optional remote sieve adjustment, and some precision farming system operations. The expansion (EX) harness attaches to the CCM3 connectors X013 and X014 . 9669 1 27/05/2004 A.50.A / 32