Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE Connecting rod and piston - Dimension (B.10.A.47 - D.40.A.30) AFX8010 mid0424a 1 The figure above contains data for piston, piston rings and pin. (* is measured on O 120 mm). Pistons Pistons Pin seat diameter 9671 1 27/05/2004 B.10.A / 23 Second phase: angle closed 60 deg Screw securing phonic wheel to timing system gear M6x1 7 - 10 Nm 62 - 88 lb in Screw securing middle gear pins (Before assembly, lubricate with engine oil) M12x1.75 First phase: pre-torque 30 Nm 265 lb in Second phase:

angle closed 90 deg Screw securing connecting rod for transmission gear adjustment (Before assembly, lubricate with engine oil) M8x1.25 22.5 - 27.5 Nm 199 - 243 lb in Standard piston diameter measured from skirt base: 10 mm 0.7480 in Standard piston diameter measured from skirt base: 19 Class A (Pistons supplied as spare parts.) 124.881 - 124.890 mm 4.9166 - 4.9168 in Class B (Class B pistons are assembled solely in production and are not supplied as spares.) 124.890 - 124.899 mm 4.9168 - 4.9137 in 50.010 - 50.018 mm 1.9689 - 1.9692 in