Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE Timing gear - Assemble (B.10.A.45 - F.10.A.20) AFX8010 1. Fit the oil pump (4) , and intermediate gears (2) , together with connecting rod (1) and tighten the screws (3) , in two stages: pre-torque, 30 Nm ( 22 lb ft ) closed angle, 90 ° . IMPORTANT: The screws fixing the intermediate gear of the engine must be lubricated with engine oil before assembly. 2. Apply Loctite 5699 silicone on the gear box (2) , with an appropriate tool (1) , as shown in the figure. mid0339a 1 IMPORTANT: Fit the gear box within 10 minutes of applying the sealant. 3. Tighten the fixing screws of the timing system box to the torques indicated here and according to the given sequence.

Star symbol - 10 screws M12 x 1.75 x 100 mm, 63 Nm ( 46 lb ft ) Circle symbol - 2 screws M12 x 1.75 x 70 mm, 63 Nm ( 46 lb ft ) Square symbol - 4 screws M12 x 1.75 x 35 mm, 63 Nm ( 46 lb ft ) Triangle symbol - 1 screw M12 x 1.75 x 120 mm, 63 Nm ( 46 lb ft ) Asterix symbol - 2 screws M12 x 1.75 x 193 mm, 63 Nm ( 46 lb ft ). mid0340a 2 15082003283483 3 9671 1 27/05/2004 B.10.A / 79