Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM Injection finishes when fuel valve (1) , opens at a certain point on the pumping element descending stroke following solenoid deactivation. Fuel flows through open valve (1) , the injector holes and channel (4) , in the cylinder head. The time for which the solenoid is excited is processed by the electronic control unit and represents the duration of injection (output). It varies according to engine service conditions. The electronic control unit is able to monitor current uptake by the solenoid in order to establish whether injection has taken place correctly or if mechanical problems have occurred, e.g. binding.

The control unit can detect injector errors only when the engine is running or during start up. 20034777 3 9672 1 27/05/2004 B.20.A / 16