Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM Injection control - Incorrect value (B.20.A.92 - G.30.C.10) AFX8010 E0385-02 - ECU Defect Cause: An error in the monitoring module. Possible failure modes: 1. Engine ECU malfunction. Solution: 1. Check condition of Fuse 1, engine ECU fuse, (20 Amp) and Fuse 38, Relay 14 and keystart switch fuse, (7.5 Amp). Check for good connections onto engine ECU and at connectors X004 and X010 . Check main Engine ECU relay K-14 for correct operation. A. If a fuse is blown or the relay is faulty, replace and check engine operation. If engine performs okay.Remove the fault code from the engine ECU memory using the electronic service tool. B.

If the fuses, relay, and wiring are okay,continue with step 2 . 2. Attempt to reload the engine ECU software using the electronic service tool. A. If the software is accepted,check engine for correct operation. B. If the software is not accepted, substitute the engine ECU. 9672 1 27/05/2004 B.20.A / 50