Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - ENGINE UNIVERSAL DISPLAY PLUS FAULT CODE 0386.2 EEPROM DEFECT, DATA INCORRECT 0386.3 EEPROM DEFECT, SHORTED TO HIGH SOURCE 0386.4 EEPROM DEFECT, SHORTED TO LOW SOURCE Cause: An error in the Engine ECU EEPROM. Effect on Engine: Engine enabled -- fuel restricted and speed restricted to 1500 rev/min. Possible failure modes: 1. Engine ECU malfunction. Solution: 1. Check condition of Fuse 1, engine ECU fuse, (20 Amp) and Fuse 38, Relay 14 and keystart switch fuse, (7.5 Amp). Check for good connections onto engine ECU and at connectors X004 and X010. Check main Engine ECU relay, K14, for correct operation. C.

If a fuse is blown or the relay is faulty replace and check engine operation. If engine performs okay, remove the fault code from the engine ECU memory using the electronic service tool. B. If the fuses, relay and wiring are okay continue with step 2. 2. Attempt to reload the engine ECU software using the Electronic Service Tool. A. If the software is accepted check engine for correct operation. B. If the software is not accepted continue with step 3. 3. Substitute the engine ECU. Wiring harness -- Electrical schematic frame 02 (A.30.A.88 -- C.20.E.02) B.20.A / 94