Case IH AFX8010 — AIR INTAKE SYSTEM

POWER PRODUCTION - AIR INTAKE SYSTEM Air cooler - Install (B.30.A.32 - F.10.A.15) AFX8010 Prior operation: Inspect all intercooler seals inside the cooler housing for damage and integrity before installation of the cooler, including isolation mounts. 1. Check the cooler to be sure there is no noticeable damage. 10034878 1 2. Place the cooler into the cooler housing. 3. Adjust the cooler so the lower mounting holes align with the cooler housing holes. Install the hardware with the isolation mount configuration, but do not torque at this time. 50034909 2 50034938 3 4. Install the top mounting brackets (1) .

Mount the support brackets (1) to the front of the cooler and torque the M8 x 25mm hardware to 18 Nm ( 13 lb ft ). Install the hardware through the support bracket and the cooler housing (3) with the ISO mount configuration installed. Torque the M10 x 50mm hardware to 26.5 Nm ( 19.5 lb ft ). Go back to the lower mounting hardware (2) on the cooler and torque to 26.5 Nm ( 19.5 lb ft ). 50040346A5 4 9673 1 27/05/2004 B.30.A / 17