Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

MULTICYLINDER ENGINES 133 Timing gear backlash Maximum allowable Push rod runout-max. Valve lifter Type Outside diameter Outside dlameter-mln. Clearance In block Max. clearance Valve face angle Valve seat angle Valve head margin seat width (Int. and eXh.) Valve depth-max. Valve stem clearance Intake Exhaust Max. stem clearance Valve stem diameter Valve stem wear limit Valve stem runout-max. Valve guide diameter Valve guide wear limit Valve guide protrusion Valve spring Standard free length Min. free length Installed height Pressure at Installed height Rocker arm shaft clearance Rocker arm shaft clearance-max.

Rocker arm bore wear limit Rocker arm shaft wear limit 011 pump Inner rotor tlp-to-outer rotor tip Max. Outer rotor-ta-pump body Max. Rotor side clearance Max. Shaft clearance Max.

T.ble 1 ENGINE SPECIFICATIONS (20M AND 2OM20) (continued) 0.05-0.13 mm (0.002-0.005 In.) 0.3 mm (0.012 In.) 0.03 mm (0.0012 In.) Mechanical 10.000 mm (0.3937 In.) 9.95 mm (0.3917 In.) 0.010-0.040 mm (0.0004-0.0016 In.) 0.10 mm (0.004 In.) 45° 45° 0.75-1.15 mm (0.030-0.045 In.) 1.n mm (0.070 In.) 1.25 mm (0.049 In.) 0.040-0.065 mm (0.0016-0.0026 In.) 0.045-0.070 mm (0.0018-0.0028 In.) 0.15 mm (0.006 In.) 7.000 mm (0.2756 In.) 6.900 mm (0.2717 In.) 0.03 mm (0.0012 In.) 7.000 mm (0.2756 In.) 7.080 mm (0.2878 In.) 7.0 mm (0.276 In.) 38.5 mm (1.52 In.) 37 mm (1.46 In.) 29.2 mm (1.15 In.) 16.16 kg at 29.2 mm (35.63 lb.

at 1.15 In.) 0.016-0.052 mm (0.0006-0.0020 In.) 0.15 mm (0.006 In.) 14.10 mm (0.555 In.) 13.90 mm (0.547 In.) 0.050-0.105 mm (0.0020-0.0041 In.) 0.15 mm (0.006 In.) 0.050-0.105 mm (0.0020-0.0041 In.) 0.15 mm (0.006 In.) 0.030-0.080 mm 0.13 mm (0.005 In.) 0.015-0.050 mm (0.0006-0.0020 In.) 0.20 mm (0.0079 In.) Bore 3GM 3GM30 Stroke Displacement 3GM 3GM30 Number of cylinders Firing order Cylinder liner diameter (3GM) Cylinder liner protrusion (3GM) Cylinder bore diameter (3GM30) Borelliner out-of-round-max. T.ble 2 ENGINE SPECIFICATIONS (30M AND 3GM30) 72 mm (2.83 In.) 75 mm (2.95 In.) 72 mm (2.83 In.) 879 cc (53.6 cu. In.) 954 cc (58.2 cu.

In.) 3 1-2-3 72.000 mm (2.8346 In.) 0.005-0.075 mm (0.0002-0.0030 In.) 75.000-75.030 mm (2.9528-2.9540 In.) 0.02 mm (0.0008 In.) (continued) ----------